Timken 22213KEJW33 Spherical Roller Bearings

r1,2 min.:1.1 mm; Static axial stiffness, preload class B:220 N/µm; Calculation factor (single, tandem) Y2:0.87; Fatigue load limit Pu:0.62 kN; d:65 mm; Basic dynamic load rating C:19.5 kN; d2:74.9 mm; Static axial stiffness, preload class A:146 N/µm; Da max.:94 mm; db max.:74.1 mm;

Basic dynamic load rating C:4.4 kN; Ew:12 mm; Fw:9 mm; Limiting speed:34000 r/min; Mass needle roller and cage assembly:0.0015 kg; Fatigue load limit Pu:0.57 kN; Reference speed:30000 r/min; U:10 mm; Basic static load rating C0:5.2 kN;

Oil Speed Rating n2:36000 rpm; Grease Speed Rating n1:30000 rpm; Basic Dynamic Radial Load Rating C:4940 N; Basic Static Radial Load Rating Co:2280 N; B:8.00 mm; Fillet Radius ra:0.30 mm; d:10.000 mm; D:26.0000 mm; Fillet Radius rb:0.10 mm;

P120°:260 kN; H1:112 mm; H:212 mm; Pa:190 kN; N:24 mm; P90°:350 kN; P55°:580 kN; Mass housing:13.7 kg; Housing:FSNL 519-616 RU; Q120°:400 kN;

N1:19.05 mm; Mass pillow block:10 kg; L:269.875 mm; J min.:196.85 mm; End plug (suffix Y):EPR 4; R2:19.05 mm; Da:110 mm; P60°:39.1 kN; R1:42.862 mm; Stabilizing ring:2 x SR-1610;

Preload:300 N; a:43 mm; K:2 mm; d:8 mm; Basic dynamic load rating C:14.6 kN; D2:26.3 mm; d2:17.7 mm; Static moment stiffness:20 N·m/mrad; Da max.:26 mm; Basic static load rating C0:20 kN;

Accessories:Two Seals & Snap-Rin; B:25.40 mm; Grease Speed Rating n1:7500 rpm; Basic Dynamic Radial Load Rating C:30700 N; Sealed Speed Rating n3:7500 rpm; Fillet Radius ra:1.00 mm; D:62.0000 mm; Basic Static Radial Load Rating Co:20400 N; d:25.000 mm; Oil Speed Rating n2:10000 rpm;

L:749.3 mm; h:69.85 mm; N1:34.925 mm; Labyrinth ring:2 x LOR 138; Max. speed for PosiTrac Plus seal:950 r/min; Housing:SAF 634; da:147.637 mm; ba:91.281 mm; Da:359.999 mm; Ca:129.794 mm;

Cap bolt, SAE grade:5; P60°:249 kN; Ca:86.614 mm; Pa:34 kN; Da:259.999 mm; P120°:94.3 kN; J1:85.725 mm; Stabilizing ring:2 x SR-0-24; H2:60.325 mm; Labyrinth ring:2 x LOR 138;

Calculation factor Y1:0.92; Fatigue load limit Pu:1.25 kN; Calculation factor Y2:0.87; a:23 mm; r1,2 min.:1.1 mm; r3,4 min.:0.6 mm; d:40 mm; Basic static load rating C0:29 kN; Calculation factor X:0.67; Mass bearing:0.37 kg;

Number of pulses per revolution N:64; Phase shift output signal:90 °; Phase shift output signal tolerance ±:30 °; Period accuracy ±:8 %; Duty cycle:50 %; Cable connector type:AMP Superseal; Mass sensor unit:0.58 kg; Duty cycle tolerance ±:10 %; Limiting speed:300 r/min;

d2:742 mm; Mass lock nut:97.1 kg; B5:112 mm; G:Tr 710x7; b:50 mm; Lock washer / Locking clip:MS 30/710; h:25 mm; d1:780 mm; Associated spanner:TMFN 600-750; d3:830 mm;

Accessories:One Shield & Snap-Ri; B:20.60 mm; D:52.0000 mm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:21200 N; Basic Dynamic Radial Load Rating C:22900 N; Oil Speed Rating n2:11000 rpm; d:25.000 mm; Grease Speed Rating n1:8000 rpm; Sealed Speed Rating n3:8000 rpm;

Basic Dynamic Radial Load Rating C:10100 N; Sealed Speed Rating n3:9000 rpm; Shielded or Sealed B1:12.7 mm; Grease Speed Rating Open/Shielded n1:13000 rpm; Oil Speed Rating Open/Shielded n2:16000 rpm; d:25.400 mm; Width Plain B:9.5 mm; Accessories:Without Accessories; Fillet Radius ra:0.79 mm; D:50.

Lock washer:W 17; R1:53.975 mm; Housing:FSAF 217; J1:53.975 mm; L:330.2 mm; Ca:45.796 mm; PG:1/8 NPT; J min.:250.825 mm; P90°:36.9 kN; P60°:61.4 kN;